Monthly Archives: October 2013

California Native Plants, erosion control, fire safe landscaping, garden design

Firesafe landscaping – Part II

Leave a comment

I walk regularly in Henry Cowell State Park in Felton. I can’t imagine losing the majestic redwood forest I enjoy so much to a fire. Over the summer there were several arson caused fires in the park. Actually 10 separate fires have occurred in the same general area and along the San Lorenzo River over the past 6 months, some caused by campfire escapes and some by arson. All of them were caused by humans.

OLYMPUS DIGITAL CAMERAWe live in this beautiful area because of the natural scenery and wildlife. To lose any part of it to wildfire would be tragic. Whether a fire is caused by humans or natural causes such as lightning it’s all the same to our neighborhood, our homes, our pets, our lives.

We know that fire in some instances can be good for the land. After many years of fire exclusion an ecosystem that needs periodic fire to remain healthy becomes overcrowded and flammable fuels build up. The Forest Service manages prescribed fires to benefit natural resources and protect communities. However, as we build homes further into nature prescribed fires are not always possible. This is where mechanical treatment can benefit ecosystems and people.

Mechanical treatment include thinning of dense stands of trees or other fuels that make an area better able to withstand fire. Pruning loser branches, piling brush or creating fuel breaks encourage a more manageable fire should one occur.

Last week I talked about how to make the area closer to your home more firesafe. Here are some more OLYMPUS DIGITAL CAMERAtips.

In areas 30-70 ft. away from your house plants should be trimmed and thinned to create well-spaced groups and help prevent a fire in the wildland from spreading to your home.  Be cautious with slopes.  If you have a large lot, the fringe area should be inspected and maintained regularly to eliminate any build up of dry brush and litter.  This reduces the chance of surface as well as crown fires.

Plant arrangements, spacing and maintenance are often as important as plant types when considering fire safety. Group plants of similar heights and water requirements to create a landscape mosaic that can slow the spread of fire and use water most efficiently. Use plants that no not accumulate dead leaves or twigs. Keep your landscape healthy and clean. On a regular basis remove dead branches and brush, dry grass, dead leaves and pine needles from your yard, especially within 30 feet from your home and at least 150 ft if you’re on a hill. Keep trees spaced at least 10 feet apart with branches trimmed at least 10 ft away from your roof. It’s best, however, to keep trees further from your house. Low shrubs can be closer in and herbaceous perennials and groundcovers can be nearest the home.

Extremely flammable plants have a high content of oil or resin and should be separated from each other, removed of dead branches and lower limbs and kept free of dry debris anywhere around your property.  Extremely flammable pyrophytes like hollywood juniper, pines, fountain grass and Japanese honeysuckle will need a higher level of maintenance.  Other common plants that are highly flammable ares sagebrush, buckwheat and deer grass.  Rosemary and purple hopseed also fall into this category.These contain oils, resins and waxes that make them burn with a greater intensity.If you have these plants on your property yearly pruning and maintenance is important.

Irrigation is vital in a fire safe landscape to maintain plant moisture especially in the 30 ft around your home.  Choose the right irritation system. While all plants can eventually burn, healthy plants burn less quickly. Consider drip irrigation and micro sprays for watering most of your landscape. Use sprinklers for lawns and other groundcovers or turf. Even drought adapted species and natives will benefit from watering every month or so during the dry season. Unwatered landscapes generally increase the risk of fire.

Mulching around your plants will preserve this precious commodity in these times of drought.  Plantings beyond 30 ft. should be irrigated occasionally but to a lesser extent.  As you get 70-100 ft from the home, native plantings that require little or no irrigation should be used.

Using fire resistant plants that are strategically planted give firefighters a chance fighting a fire around your home especially within the 100 foot defensible zone. Each home or property is different and you will need to look at the unique qualities of yours in planning your firescaping. Some of the info for this column was obtained from 2 valuable booklets.   ‘Living with Fire in Santa Cruz County’, prepared by Cal Fire and available free from any fire dept or online and another from  Calif. Dept of Forestry at  www.fire.ca.gov/.

California Native Plants, drought tolerant plants, fire safe landscaping, firescaping, garden design, landscape design, plant maintenance

Firescaping-Part I

Leave a comment

shaded_fuel_brake_sign.2048I drove through the Groveland area near Yosemite a couple of days before the Rim Fire started on August 17th. The local talk over Tioga Pass was then about the recent Aspen fire in the Sierra National Forest. The Rim fire has now burned 400 square miles of forest and cost $122 million to fight to date. What started as a 40 acre fire when discovered exploded to over 100,000 acres within 2 days. It is now the 3rd largest in California history.

Remote sensing satellite images indicate that virtually all the vegetation is dead on nearly 40% of the burned area. Chaparral and oaks will resprout but ecologist say it could take 30 to 50 years for the forest to reestablish itself. It scorched some of the last remaining old growth in the Stanislaus National Forest. Two years of drought and constant slow warming across the Sierra Nevada  worked to turn the Rim Fire into an inferno. For years forest ecologists shaded_fuel_brake_example.2048have warned that Western wildfires will only get worse. The fuels get drier and drier.

shaded_fuel_brake_example.2048There have been two wildfires close to where I live in Felton, one of which was only 5 miles away on Martin Grade in Bonny Doon several years ago. How can I protect my home? Is there a landscape that is safer in a wildfire than another? Which plants burn more readily?

Many people think they have to clear everything within 30 feet of their house to truly have a defensible space.  This is unnecessary and actually unacceptable due to soil erosion and habitat destruction reasons.  We want to retain the character of this beautiful area we live in, provide the food and shelter that our native wildlife are accustomed to but also reduce fire risk.  For example, grasslands mowed to leave 4-6″ of height allow insects, reptiles, amphibians, and small mammals shelter, food and a place to reproduce. Leaving 4-6″ standing also provides some erosion protection and shades out some of the weeds that follow disturbance.

Fire safe landscaping is a term used to describe defensible space.  It can look like a traditional landscape.  The idea is to surround the home with things less likely to burn and place them to provide separation between canopies and avoid creating fire ladders.  Highly flammable plants should be placed, whenever possible, with low-growing and/or low fuel plants.

Many homes may not have 30 ft. between their house and the property line but following these guidelines will help.  Plants in this area need to be the slowest to ignite and should produce the least amount of heat if they do burn.  There are plants with some fire resistance which include drought tolerant California natives and Mediterranean climate selections.  The key to fire resistance, though, is maintenance and keeping the moisture in the foliage high.

For example,  Baccharis pilularis or dwarf coyote brush is generally considered highly flammable if its lush green top growth covers a hazardous tangle of dry branches and leaves several feet high.  Trim this plant down low in early spring, remove the dry undergrowth, follow with a light feeding and watering and the new top growth is now resistant to fire.

Other considerations may be as important such as appearance, ability to hold the soil in place and wildlife habitat value. Some fire-resistant California friendly plants are western redbud, monkey flower, ceanothus, sage, yarrow, lavender, toyon, California fuchsia and wild strawberry. Also consider coffeeberry, flowering currant, bush anemone, snowberry, California wax myrtle and evergreen currant. Fire resistant plants from areas include rockrose, strawberry tree, Chinese pistache, barberry, escallonia, oleander, pittosporum, bush morning glory and wisteria to name just a few.

Next week I will discuss plant spacing arrangement and maintenance to help you prepare a fire-safe landscape around your home.